IPJ-A5000-000
Impinj Speedway Revolution GPIO Box with Connector Cable
Impinj designed the Speedway® Revolution GPIO Box for use with the Speedway® Revolution reader to provide convenient access to the reader’s GPIO (General Purpose Input/Output) port. The GPIO Box interfaces with the reader via a supplied HD15 cable, and separates each input and output signal to easy-access screw terminals. Neighboring ground and power terminals accompany each signal terminal to easily connect three-wire devices. The GPIO Box also includes an on-board
relay to interface with devices require high wattage or an open/short signal.
-
- Easy-access screw terminals
- Power and ground terminals for each input and output
- Each output can provide 250mA at 24V with optional external universal power supply
- SPDT Relay output capable of 5A at 240VAC
- Ability to use reader-supplied 5V for low power digital applications, including the SPDT Relay
- Highly visible LED indicators for each input and output eases troubleshooting and diagnostics
- Access to reader’s RS-232 serial interface
-
Electrical Specifications Vcc 5V(Min), 24V(Typical), 30V(Max) Io 250 mA li 250 mA Ri 15 kΩ Relay Nominal Switch Capacity 10A, 250 V AC
10A, 125 V AC
6A, 277 V ACRelay Max Switching Voltage 250 V AC
100 V DCRelay Max Switch Current 10 A(AC), 5 A(DC) Relay Expected Life, Electrical 1.3 dB (Max) Relay Expected Life, Mechanical 107 At 180 cpm Screw Tightening Torque 0.22Nm (Min.), 0.25 Nm (Max.) Conductor AWG 26 (Min.), 16(Max.)n Environmental Specifications IP Rating IP54 Temperature -25–55°C Humidity 05–95% Humidity 5% to 95%, non-condensing Mechanical Specifications Material Polycarbonate (Enclosure material) Dimensions 120 x 80 x 55 mm (Enclosure size)
6–8 mm (Cable gland inner diameter) IPJ-A5000-000