EIOC400

You are here: Home » Products » Access Control » CEM Systems » CEM Systems – Hardware » EIOC400
EIOC400

EIOC400
16-Input and 8-Output Controller with Power Supply

The EIOC400 features 16 inputs and 8 outputs. The 16 inputs can be cross-mapped to one or many of the outputs upon activation /deactivation. The 8 digital outputs are a combination of 4 NO/NC relay contacts and 4 open collector switches that can all be controlled by the EIOC400. The outputs can be used to control all kinds of equipment including Intruder panels, PIR detectors, or switching on/off heating and lighting.

    • Intelligent input output controller
    • Onboard 10/100 Mbps Ethernet host connection
    • Three way Ethernet Layer 2 switch
    • Smart power management automatically detects supply
    • Onboard battery charging and switchover
    • Encrypted host communications with TLS and AES encryption
    • Sixteen general purpose inputs
    • Eight outputs with user selectable current limits
    • Overlay wiring guide
    • Onboard LEDs and LCD display provides status information
    • Twelve character keypad
    • Active optical tamper with option for external tamper
    • Suitable for use with AC2000 access control suite of products

  • Physical
    Size (Enclosure) 430 x 405 x 85 mm (16.9 x 15.9 x 3.3 inches)
    Weight 5.9 kg (13.0 lbs)
    Housing Steel enclosure
    Power
    Supply Input Voltage – Board only 12 to 28 VDC
    Supply Input Voltage – Enclosure Input: 100-120 VAC / 200-240 VAC (selectable) 50/60 Hz
    150 W Output
    13.5 VDC
    Power Over Ethernet Option IEEE 802.3.bt
    90 W / 72W at PD
    Environmental
    Operational Temperature -20°C to 50°C (-4°F to 122°F)
    IP Rating IP20
    Functionality
    LED indicators Power – visible externally on enclosure
    Link to Host, Comms RX/TX
    Fault/Tamper
    LCD Display & Keypad Fitted – 2×16 ASCII text with backlight
    Diagnostics and Setup
    Twelve character capacitive light-touch keypad
    Inputs Sixteen supervised inputs (4×4) – voltage supplied
    Giving four state – supervised
    Outputs Eight outputs ( 4 x 2 with shared current limiting)
    • 4x Relay @ 10-28 V @ 2A with high side switching or dry contact
    • 4x FET @ 10-28 V @ 5A Switchable ground
    Current monitored
    Current limited (stabilised )
    Surge protected
    Configuration Operational parameters are downloaded from host computer
    Real time clock Accurate RTC with rechargeable battery backup
    Communication Interface
    To System Host 10/100 Base-T TCP/IP using CAT5
    Unshielded twisted pair cable
    Host Connection RJ45
    Regulatory
    Agency Certifications CE (Designed for UL294)
  • EIOC400