S700
Exit Card Reader w/ PIN and RFID Reader
The S700 Exit Card Reader is the next generation card reader, designed for use with AC2000 as part of an integrated online access control system. The exit reader is an extension to the S700e master reader.
-
- Multi-technology exit card reader designed for use as part of the CEM Systems AC2000 access control software range
- Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication
- Integral reading support for 13.56MHz smart card and 125 kHz proximity technology
- Communicates securely with the master reader
- Large graphical LCD which is used to display a number of predefined messages
- Soft-touch capacitive keypad
- Four analogue inputs to monitor door or alarm conditions
- Two changeover relay outputs to activate door strike or other equipment
- Remote programming facility to download updated firmware
- Easy to install
- Weather-proof casing: IP65- rated
-
Physical Size 144 x 100 x 49 mm (At widest point) Weight 300 g Housing Flame retardant polycarbonate, with UV stabilisation, RoHS compliant Colour Black Power Requirements Voltage 9-28 VDC Current Consumption (Watts) 2.4W Typical – 4.8W Peak Environmental IP Rating IP65 Temperature -20° to +60° C (-4° to 140° F) LED Indicator Lightbar: High intensity multi-coloured LCD Indicators 2.4” diagonal, 240 x RGB x 320 TFT full view, Brightness: 400 cd/m2 dimmable,
Contrast ratio 400:1Keypad 12 key, standard layout, (10 numeric keys, 2 function keys), capacitive, light touch Functionality Inputs Four analog inputs —voltage supplied, four state (tamper detect) Outputs Two relays fitted —Changeover volt free contacts Rating 24 VDC @ 2 Amps max Memory 32 MB SDRAM Data: 2 Gb flash Communication Interface To Master Reader RS-485 Interfaces Single Wiegand interfaces with a maximum cable length of 50M Connection Screw terminal: Relay & Power, Wiegand, Serial Regulatory Agency Certifications FCC Part 15, CE 
S700
