S700e

You are here: Home » Products » Access Control » CEM Systems » CEM Systems – Reader/Controller » S700e
S700e

S700e
Card Reader with PIN and RFID Reader

The S700e is the next generation fully integrated IP card reader and combined controller which can be deployed to control access to restricted areas or in special applications where card activation of machinery is required.

    • Intelligent card reader and combined controller all housed within the same unit, no requirement for an additional intelligent control panel in the system design
    • Contactless card presentation with the option to enable Personnel Identification Number (PIN) for two stage authentication
    • Soft-touch capacitive keypad for dual authentication of card and associated PIN number
    • Context sensitive function keys for selection and navigation
    • Integral reading support for 13.56MHz smartcard and 125 kHz proximity technology
    • Large reader database for off-line card verification and alarms
    • Bright 2.4 inch graphical LCD display which is used to display a number of easy-to-read and simple to comprehend predefined messages
    • Four analogue inputs to monitor door or alarm conditions
    • Two changeover relay outputs to activate door strike or other equipment
    • Weather-proof casing: IP65 rated & IK06 impact rating

  • Physical
    Size 144 x 100 x 49 mm (At widest point)
    Weight 300 g
    Housing Flame retardant polycarbonate, with UV stabilisation, RoHS compliant
    Colour Black
    Power Requirements
    Voltage 9-28 VDC
    Current Consumption (Watts) 2.4W Typical – 4.8W Peak
    Environmental
    IP Rating IP65
    Temperature -20° to +60° C (-4° to 140° F)
    LED Indicator Lightbar: High intensity multi-coloured
    LCD Indicators 2.4” diagonal, 240 x RGB x 320 TFT full view, Brightness: 400 cd/m2 dimmable,
    Contrast ratio 400:1
    Keypad 12 key, standard layout, (10 numeric keys, 2 function keys), capacitive, light touch
    Functionality
    Inputs Four analog inputs —voltage supplied, four state (tamper detect)
    Outputs Two relays fitted —Changeover volt free contacts
    Rating 24 VDC @ 2 Amps max
    Memory 32 MB SDRAM Data: 2 Gb flash
    Database Size in Off-line Mode
    Cardholders 250,000
    Alarms & Transactions 50,000
    Communication Interface
    To Exit Reader RS-485
    Interfaces Single Wiegand interfaces with a maximum cable length of 50M
    Connection Screw terminal: Relay & Power, Wiegand, Serial
    To System Host 10/100 Base-T TCP/IP using CAT5/CAT6 shielded cable
    Ethernet Connection RJ45
    Regulatory
    Agency Certifications FCC Part 15, CE
  • S700e