PG8008
ioGATES Pillar Swing Gate 800mm
The PG8008 Pillar Swing Gate is designed and manufactured with the strictess quality assurance. This unique swing gate is installed in conjunction with any access control system and provides valuable assistance to security personnel at any monitored entrance.
-
- Alarm: When arms are pushed by force, alarm will be triggered automatically and arms will be locked.
- Silent Operation
- Safety: Pillar gate is equipped with sensors to avoid damage on collision. The arm will open to protect the inner mechanism of the pillar gate.
- Reset: After a valid card access; after 10 second and no passage is detected, the system will reset the authorization and close the gate. Reset time is adjustable 1-60sec.
- The Pillar Gate can integrate with any door access control system and biometric recognition system.
- The Pillar Gate is bidirectional and allow entry and exit through the turnstile.
-
Swing Length 450 ~830mm Passage Width 500~900mm Swing Angle 180° Swing Direction Bidirectional ; (Option: Unidirectional) Open turnstile time 2~3S Pass speed 25-30 Persons/min Control Board LED Digital display Function / Counting Function (Option) Working Environment Indoor (Option: Outdoor with Canopy) Temperature -10°C 〜 50°C LED Light Traffic Directions Operation Cycle >3Millions Input Port Relay Dry Contact Communication Interface RS485 Interface Distance < 1200M Cutting Methodoloy Laser Cutting Material Standard 304 stainless steel Swing Gate Material Standard 304 Tubular Stainless Steel Working Voltage AC220 ±10% Drive Motor 24V Brush DC motor Size Pole Diameter: 168mm; Height: 1050mm Weight 30kg/pcs 
PG8008
