ioGATES Pillar Swing Gate 800mm
The PG8238 Pillar Swing Gate is designed and manufactured with the strictess quality assurance. This unique swing gate is installed in conjunction with any access control system and provides valuable assistance to security personnel at any monitored entrance.
- Alarm: When arms are pushed by force, alarm will be triggered automatically and arms will be locked.
- Silent Operation
- Safety: Pillar gate is equipped with sensors to avoid damage on collision. The arm will open to protect the inner mechanism of the pillar gate.
- Reset: After a valid card access; after 10 second and no passage is detected, the system will reset the authorization and close the gate. Reset time is adjustable 1-60sec.
- The Pillar Gate can integrate with any door access control system and biometric recognition system.
- The Pillar Gate is bidirectional and allow entry and exit through the turnstile.
Housing Material Standard 304 stainless steel Thickness 2.0mm thickness Working Voltage 220VAC ±10% Driving Motor Servo motor Cylinder Diameter 141 mm (Optional 168mm) Cylinder Height 1000mm Single Passage Width 450mm – 800 mm Direction Single or Bi-directional (optional) Working Environment Indoor/Outdoor (With Canopy) -10℃〜70℃ Relative Humidity ≤90% Time of Opening/Closing 1 second Passage Speed 40 persons/min (open), 25-30 persons/min (closed) Initialization Time Upon Power On 4 seconds Reset Time 10 seconds MTBF 3 million Communication Interface RS485 Interface, Distance ≤1200mm