FG8801

You are here: Home » Products » Access Control » ioGATES » Flap Gates » FG8801
FG8801

FG8801
ioGATES Flap Gate 1400mm Series

The FG8801 Flap Gate Turnstile is designed and manufactured with the strictess quality assurance. This unique pedestrian Flap Barrier installed in conjunction with any access control system provides valuable assistance to security personnel at any monitored entrance. The Flap barrier is available as a single or multiple-lane setup and is compatible with most access control systems, such as magnetic, biometric and proximity readers.

Model Number Description
FG8801B-L/R Flap Gate Turnstile – (Left/Right) DC Brush Motor
FG8801B-M Flap Gate Turnstile – (Middle) DC Brush Motor
FG8801L-L/R Flap Gate Turnstile – (Left/Right) Brushless Motor
FG8801L-M Flap Gate Turnstile – (Middle) Brushless Motor
FG8801S-L/R Flap Gate Turnstile – (Left/Right) Servo Motor
FG8801S-M Flap Gate Turnstile – (Middle) Servo Motor
FG8801LW-L/R Flap Gate Turnstile Double Flap – (Left/Right) Brushless Motor
FG8801LW-M Flap Gate Turnstile Double Flap – (Middle) Brushless Motor
    • Alarm: When arms are pushed by force, alarm will be triggered automatically and arms will be locked.
    • Silent Operation
    • Safety: Turnstile are equipped with sensors to prevent accidentally hitting someone passing thru the flap gate arms.
    • Standby: When the barrier is on standby mode and there are no authorized card swipe, an intrusion alarm is detected as soon as the sensors are triggered
    • Tailgate: The turnstile will close the flap gate barrier when someone triggers the sensors without authorized biometric or card swipe, Tailgating or wrong direction.
    • Reset: After a valid card access; after 10 second and no passage is detected, the system will reset the authorization and close the gate. Reset time is adjustable 1-60sec.
    • The turnstile can integrate with any door access control system, biometric recognition system, or Electro Static Discharge system.
    • The turnstile is bidirectional and allow entry and exit through the turnstile.

  • Housing material Standard 304# stainless steel
    Working voltage AC220±10%V 50/60±10%HZ
    Drive motor FG8801B DC Brush Motor
    FG8801L Brushless Motor
    FG8801S Servo Motor
    FG8801LW Brushless Motor
    Size 1400mm (L) * 310mm (W) * 990mm (H)
    Retractable arm length 250 mm (FG8801B / FG8801L)
    250-450mm (FG8801LW)
    Passage width 550 mm (FG8801B / FG8801L)
    550-900mm (FG8801LW)
    Direction Single or Bi-directional (optional)
    Working environment Indoor/Outdoor (Requires Canopy)
    Relative humidity -25℃～70℃ ; Relative humidity: ≤90%
    Time of opening/closing 0.6 second
    Pass speed 40 persons/min (Open), 25-35 persons/min (Closed)
    Bootup time 3 seconds
    Reset time 10 seconds
    Life cycle 3 Million
    Communication interface Standard RS485 up to ≤1200m
    Power 220VAC 50/60Hz
  •   FG8801