SG8007B
Swing Gate Turnstile (DC Brush Motor)
The SG8007B Swing Gate Turnstile is designed and manufactured with the strictess quality assurance. This unique pedestrian Swing Barrier installed in con-junction with any access control system provides valuable assistance to security personnel at any monitored entrance. The Swing barrier is available as a single or multiple lane setup and is compatible with most access control systems, such as magnetic, biometric and proximity readers.
| Model Number | Description |
| SG8007B-L/R | Swing Gate Turnstile – (Left/Right) DC Brush Motor |
| SG8007B-M | Swing Gate Turnstile – (Middle) DC Brush Motor |
-
- Alarm function: when arms are pushed by force illegally, alarm will be triggered automatically and arms will be set locked.
- Turnstile Working Mode can be adjusted on main control board.
- Anti-pinch function: when it is meet the hinder during the reset time, the electrical machine automatically stop in specified time, the turnstile will default the delayed and reset again.
- The turnstile will close the door if another person piggybacks without authorization, or access in one direction but passage is in the other direction.
- If without authorization, the turnstile will lock automatically.
- Anti-collision function: when the turnstile arm closed, if it is under the collision, the arm will open to protect the Transmission of inner machine.
- Auto Reset Functions: after card swipe and there was no passage during a specified time (default is 10s), the system will cancel the passage authorization and will re-lock. Auto Reset time is adjustable between 1~60s.
- Infrared reset function (Optional:4 pairs or 6 pairs Infrared)
- Infrared induction clamp function (4 pairs Infrared)
- The turnstile can be used as door access control system, ticketing system, biometric recognition system, and Electro-Static Discharge (ESD) System.
- The turnstile is bidirectional (pedestrian can enter and exit from one pair of turnstiles)
- Can manager and long-range control the turnstile directly by managing the computer.
- Flashing light prompt function: it is convenient to find the turnstile problem by administrative staff
-
Housing material 304# Stainless steel Working voltage AC220±10%V 50±10%HZ Drive motor DC Brush Motor Size 1400mm (L) * 202mm (W) * 990mm (H) Arm Width 500-900 mm Swing Arm 180 degree Direction Single or Bi-directional (optional) Working environment Indoor/outdoor -10°C ~ 70°C Relative humidity ≤90% Time of opening/closing 1 second Passage speed 40 persons/min (open), 25-30 persons/min (closed) Time to work after power on 3 seconds Reset time after break down 10 seconds Life cycle 3 million cycles times Communication interface Standard RS485 interface, distance ≤1200m Input interface +12V level signal or pulse width>100ms 12V pulse, drive current>10mA 
SG8007B
