SAC600KPUM
Standalone Keypad Access Control
SAC600KPUM is a single door multifunction standalone access controller supporting 2000 users. It can work in several authorization modes: CARD, PIN, CARD+PIN. It is very versatile and can also connect to 3rd party Access Control as a Keypad Reader via its Weigand Output. It is suitable for mounting in indoor applications.
Ideal for door access applications not only for small shops but also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.
-
- Strong Zinc Alloy Electroplated anti-vandal case
- Full programming from the keypad
- 2000 users, supports Card, PIN, Card + PIN
- Can be used as a stand alone keypad
- Backlight keys
- Wiegand 26 input for connection to external reader
- Wiegand 26 output for connection to a controller
- Adjustable Door Output time, Alarm time, Door Open time
- Very low power consumption (30mA)
- Fast operating speed, <20ms with 2000 users
- Lock output current short circuit protection
- Easy to install and program
- Built in light dependent resistor (LDR) for anti tamper
- Built in buzzer
- Red, Yellow and Green LEDS display the working status
| Card Type | EM |
| Frequency | 125KHz |
| Operating Voltage | DC 12V±10% |
| User Capacity | 2000 |
| Card Reading Distance | 3-6 cm |
| Active Current | <60ma |
| Idle Current | 25±5 mA |
| Lock Output Load | Max 3A |
| Alarm Output Load | Max 20A |
| Operating Temperature | -45°C ~ 60°C |
| Operating Humidity | 10% – 90% RH |
| Mounting | Indoor |
| Adjustable Door Relay time | 0- 99 minutes |
| Adjustable Alarm Time | 0- 3 minutes |
| Wiegand Interface | Wiegand 26 bit |
| Wiring Connections | Electric Lock, Exit Button, External Alarm,External reader |
| Size | 110 x 75 x 25mm |
| Weight | 0.65Kg |
SAC600KPUM
