AS0073-000
I8 Eight Input Bus Module
The Software House I8 module provides a flexible, cost-effective means to expand the input and output functionality of any iSTAR or apC access controller. Common applications include alarm monitoring and control and elevator control. The I8 input module provides eight Class A supervised inputs. Three LEDs per input help the installer commission and troubleshoot each input circuit – red if the input is in alarm, green for normal, and yellow for a supervision error. LEDs may be turned off via a DIP switch setting.
-
- Provides cost-effective expansion of input and output capacity
- Compatible with full range of Software House iSTAR and apC access control panels
- Locate modules up to 1,220 m (4,000 ft) away from controllers using flexible two-wire RS-485 RM bus
- Reduces length of sensor and control wiring to save installation costs
- I8 provides eight Class A supervised inputs
- Three status LEDs per input (red/yellow/green) and one per output enable quick diagnostics and troubleshooting
- Small, modular size requires minimal panel space
- Dedicated tamper input included on each module
- Optional UL-listed enclosure available
- Fully compatible with both C•CURE 9000 and C•CURE 800/8000
-
Dimensions (H x W) 11.0 x 15.0 cm (4.3 x 5.9 in) Environmental 0° to 50° C (32° to 122° F);
5 to 85% relative humidity, non-condensingPower Input Voltage 12 VDC +/- 10% Tamper Dedicated input for external tamper switch Weight 0.23 kg (8 oz) Regulatory UL 294, UL 1076, FCC Part A, CE,
EN 50133, RoHSPower Requirements 180 mA @ 12 VDC Inputs Eight Class A supervised LEDs per Input Red (alarm), green (normal), yellow
(supervision error) 
AS0073-000
