AS0074-000
R8 Eight Output Bus Module
The Software House I8 module provides a flexible, cost-effective means to expand the input and output functionality of any iSTAR or apC access controller. Common applications include alarm monitoring and control and elevator control. The R8 output module provides eight Form C dry contact relay outputs. A red status LED per output shows the state of the relay.
-
- Provides cost-effective expansion of input and output capacity
- Compatible with full range of Software House iSTAR and apC access control panels
- Locate modules up to 1,220 m (4,000 ft) away from controllers using flexible two-wire RS-485 RM bus
- Reduces length of sensor and control wiring to save installation costs
- R8 provides eight Form C relay outputs
- Three status LEDs per input (red/yellow/green) and one per output enable quick diagnostics and troubleshooting
- Small, modular size requires minimal panel space
- Dedicated tamper input included on each module
- Optional UL-listed enclosure available
- Fully compatible with both C•CURE 9000 and C•CURE 800/8000
-
Dimensions (H x W) 11.0 x 15.0 cm (4.3 x 5.9 in) Environmental 0° to 50° C (32° to 122° F);
5 to 85% relative humidity, non-condensingPower Input Voltage 12 VDC +/- 10% Tamper Dedicated input for external tamper switch Weight 0.23 kg (8 oz) Regulatory UL 294, UL 1076, FCC Part A, CE,
EN 50133, RoHSPower Requirements 45 mA @ 12 VDC plus 32 mA per active relay Outputs Eight Form C dry contact relays LED per Output Red (relay active Relay Contact Ratings 30 VDC, 2.0 A resistive
30 VDC, 1.0 A inductive
125 VAC, 0.4 A 
AS0074-000
