ESTAR001

You are here: Home » Products » Access Control » Software House » Door Controllers / Modules » ESTAR001
ESTAR001

ESTAR001
iSTAR Edge 1-Reader

iSTAR Edge is a powerful, IP edge access control device that provides a strong feature set to secure any door. Its optional Power over Ethernet (PoE) module provides ample power for two doors, and allows iSTAR Edge to leverage existing network infrastructure to reduce installation costs.

    • Controls and powers all access control devices at the door to minimize costly wiring
    • Optional PoE plug-in module features PoE Plus, with enough power for two doors
    • Includes advanced clustering, peer-to-peer communication, intrusion zones and keypad commands, extended card numbers, advanced door monitoring, and anti-passback
    • Localized access control decision making with storage for up to 400,000 personnel records
    • Dedicated input for fire alarm interlock releases door locks during fire conditions
    • Full complement of inputs/outputs plus optional I/O expansion modules
    • Local LCD and LEDs provide clear startup and troubleshooting information
    • Onboard 256-bit AES encryption; FIPS 197 listed
    • Jumper/selectable 12 or 24 VDC for lock power
    • Fully compatible with C•CURE 9000 and C•CURE 800/8000

  • Physical
    Dimensions (H x W x D) Enclosure: 305 x 305 x 101 mm (12 x 12 x 4 in)
    Board: 190 x 146 x 25 mm (7.5 x 5.75 x 1 in)
    Enclosure Material 18g steel, with lock and tamper
    Expansion Includes mounting standoffs for two point expansion modules
    (I8, I8-CSI, R8 or RM-4)
    Environmental 0° to 50° C (32° to 122° F)
    5 to 95% relative humidity, non-condensing
    Weight with Enclosure 4.2 kg (9.3 lbs)
    Electrical
    Power Requirements 12 VDC (-15/+20%) or 24 VDC (-15/+25%),
    auto-sensing
    Board only: 200 mA@12 VDC or 100 mA@24VDC;
    Max. of 3.8 A@12 VDC or 3.1A@24VDC for board plus all attached devices.
    Standards Supported PoE (802.3af), 12.95 W min; PoE Plus (802.3at), 25.5 W min Power negotiation uses
    two-state physical discovery (LLDP-MED not supported)
    PoE Standard Selection Jumper-selectable
    Lock Power Voltage Jumper-selectable between 12 and 24 VDC
    Memory and RTC Backup CR 2032 lithium battery provides RTC backup;
    database and buffered transactions stored in
    non-volatile memory
    Operational
    Memory 64 MB RAM, 128 MB flash EEPROM
    Ethernet Ports One, 10/100Base-T
    Readers/Cards
    Number of Readers One (1)
    Types of Readers Supported Wiegand
    Reader Technologies Supported Multi-Technology, Proximity, Smart Card (incl. PIV II & TWIC), Wiegand
    Inputs/Outputs
    Supervised Inputs Four (4)
    Fire Alarm Interlock Inputs Two, fire alarm input and manual keyswitch override (supervision supported)
    Additional Inputs Tamper switch, power fail, and low battery
    Auxiliary Power Available 12 VDC; 350mA
    Output Protection Snubber and transzorb (outputs use socketed relays)
    Output Two, individually configurable via jumper as power sourcing (wet),
    or dry contact relay
    Output Power, Wet 12V or 24 VDC, 0.75A (If iSTAR Edge powered locally, output voltage follows input voltage.
    If using PoE/PoE Plus, jumper-selectable between 12 and 24 VDC)
    Output Protection, Per Output PTC resettable fuse, 0.75 A, snubber, transzorb
    Output Rating, Dry S30V AC/DC, 3 A
  • ESTAR001