GSTAR004

You are here: Home » Products » Access Control » Software House » Door Controllers / Modules » GSTAR004
GSTAR004

GSTAR004
iSTAR Edge G2, 4-Reader

iSTAR Edge G2 is a powerful, cyber-hardened IP edge access control device that provides reliable localized access control decision making at each door. Its optional Power over Ethernet (PoE) module provides ample power for two doors and allows iSTAR Edge G2 to leverage existing network infrastructure to reduce installation and startup costs.

    • Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders
    • Controls and powers all access control devices at the door to minimize installation costs
    • Power over Ethernet (PoE) module features PoE Plus, with enough power for two doors and associated devices
    • Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection
    • Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic
    • Dual GigE Network ports with IPv6, DHCP and 802.1X support
    • Supports OSDP Secure Channel for encrypted, two-way reader communications
    • Supports embedded High Assurance FICAM operation without additional third-party hardware
    • Remote web diagnostics to quickly fix performance issues anywhere using a web browser

  • Physical
    Dimensions 18g Steel Enclosure: 305 x 305 x 101 mm (12 x 12 x 4 in)
    Board: 190 x 146 x 25 mm (7.5 x 5.75 x 1in)
    Shipping Box: 381 x 330 x 178 mm (15 x 13 x 7 in)
    Weight with Enclosure 4.2 kg (9.3 lbs)
    Enclosure Features Includes lock and tamper switch, and mounting standoffs for two expansion modules (I8, I8-CSI, R8 or RM-4)
    Environmental Operating Temperature: 0°C to 50°C (32°F to 122°F)
    Humidity: 5 to 95% RH
    Electrical
    Input Voltage 12VDC (-15/+20%) or 24VDC (-15/+20%)
    Input Current Board: 500mA@12VDC / 250mA@24VDC
    Max Power (Boards and Attached Devices) 5A @ 12VDC and 24VDC for boards plus attached devices
    Heat Dissipation 140 BTU/HR typical
    Electrical – Optional PoE+ Module
    Standards Supported PoE (802.3af), 12.95 W max; PoE Plus (802.3at), 25.5 W max. Power negotiation uses two-state physical discovery or LLDP-MED protocol
    Power Available for Attached Devices PoE: 550 mA@12V; PoE Plus: 1,600 mA@12V
    Network Port for PoE Port 1
    Operational
    Processor NXP iMX7
    System Memory 16GB Flash eMMC; 2GB RAM
    Cardholder Capacity 1,000,000; ten clearances, five cards/person, 40-digit cards
    Operating System Hardened Linux kernel, Yocto project (YP)
    Network Dual GigE LAN ports
    Network Authentication TLS 1.3 using AES256 symmetric encryption, unique certificates
    Port Authentication 802.1X port authentication protocol
    Readers/Cards
    Number of Readers 4
    Readers Types Supported OSDP, RM, Wiegand, Touchscreen (Two touchscreens max; two Wiegand onboard
    Max. Distance to Reader OSDP, RM: 1,200 m (4,000 ft)
    TouchScreen:
    RM Mode: 1,200 m (4,000 ft) – power varies according to application
    Smart Mode: 10 m (33 ft)
    Wiegand: 150 m (500 ft)
    Reader Power Available 12VDC, 750mA (wiegand), 12V, 1.2A (RS485)
    Inputs/Outputs
    Inputs Eight supervised inputs; tamper, low battery, power fail
    Auxiliary Input Power 12VDC, two (350 mA each)
    Input Expansion Up to 64 additional inputs using I8 expansion modules
    Outputs Four, individually configurable via jumper as power sourcing (wet) or dry contact
    Output Expansion Up to 64 additional Form C outputs using R8 expansion modules
    Output Power, Wet 12 VDC or 24 VDC, 0.75A per port
    Output Protection Load switch, 0.75A, snubber, transzorb
    Output Rating, Dry 30V AC/DC, 3A
  • GSTAR004