PSX-75-E1
PSX 75W Power Supply/Battery Charger
PSX Single Voltage Power System is a high efficiency, off-line switch mode power supply battery charger designed as a general purpose power supply to provide uninterrupted power for locks, auxiliary equipment, and iSTAR intelligent controllers. Capable of providing two power outputs and featuring user selectability for 12 or 24V DC, the unit is configured in a painted steel, locking enclosure with tamper switch and integral battery space.
-
- Provides uninterrupted back-up power for iSTAR and apC/8X door controllers
- Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation
- Switched and resettable outputs
- Network communication interface option
- Intelligent battery charging and battery state monitoring
- Dual rate charging restores battery sets from 4Ah to 80Ah
- Reverse polarity, overcurrent, and thermal overload protection
- 4.5” enclosure depth accommodates large battery sets
- RoHS compliant, lead free, high efficiency design
- Lifetime warranty
-
Inputs Voltage 120/230V AC, 50/60 Hz Power 83W AC maximum Outputs DC System Voltage 12.5 / 25V DC Current 6/3A DC Protection Electronic protection and fusing (7.5A) AC Fault Output Form C dry contact Activation AC power failure, blown AC fuse Low Battery Output Form C dry contact Activation Below 10.2 / 20.4V DC Battery Charge Maximum Ah Rating 40Ah Minimum Ah Rating 1Ah Battery Recharge Time 40Ah / 48 hours Cabinet Battery Space Two 12Ah batteries Physical Dimensions (W x L x H) 35.6 x 30.5 x 11.4 cm (14 x 12 x 4.5 in) Weight Without Battery: 3.5 kg (7.7 lbs)
Battery (single): 6.1 kg (13.5 lbs)Operating Temperature 0° to 50°C (32° to 122°F) Heat Dissipation 33 BTU/hr Regulatory Tested by UL UL294, UL603, FCC Part 15, Subpart B Tested by ETL UL294, UL603, UL1076, FCC Part 15, Subpart B, ULC S318, ULCS319, ULCS527
CSA C22.2#107.1, CSA 22.2 #60950 CSFM Approved / CE / RoHS 
PSX-75-E1
