USTAR-LT08
iSTAR Ultra LT 8-Reader
USTAR-LT08 iSTAR Ultra LT is a powerful, network-ready door controller that supports 8 readers, using IP-ACM Ethernet Door Modules. Its strong feature set answers the most demanding access control requirements of enterprise applications.
-
- Powerful IP-ready door controller for 8 readers
- Available in two-reader PoE Plus solution for stand-alone applications
- Hardened Linux embedded OS for improved security and scalability
- Onboard 256-bit AES network encryption
- Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution
- Native intrusion zone functionality
- Includes global anti-passback and advanced peer-to-peer clustering
- Manages up to 500,000 cardholders in local memory
-
Physical Dimensions (H x W x D) Plastic: 183 x 307 x 62 mm (7.20 x 12.09 x 2.44 in)
Metal: 391.65 x 311.15 x 83.77 mm (14.25 x 12.25 x 3.30 in)
Board Only: 148 x 112 x 18 mm (5.83 x 4.41 x 0.71 in)Weight Plastic: 1.0 kg (2.2 lbs)
Metal: 1.52 kg (3.35 lbsEnclosure Material ABS plastic, with front and rear tamper; 18 gage SGCC metal, front tamper Environmental Operating Temperature: 0-50°C (32-122°F)
Operating Relative Humidity: 5-95% RH non-condensing
Storage Temperature: -20 – 60°C (-4 – 140°F)Electrical Power Requirements, GCM Local power: 12V DC (-15/+20%);
Board only: 700 mA@12V DC; Max. of 1.60 A@12V DC for board plus all attached devicesPoE Standards PoE (802.3af), 12.95W min;
PoE Plus 802.3 at, 25.5W min (power negotiation uses two-state physical discovery or LLDP-MED protocol)Power Available for Attached Devices PoE: 315 mA@ 12V; PoE Plus or local power: 750 mA@12V Heat Dissipation 150 BTU/Hr typical Memory and RTC Backup Rechargeable lithium battery provides RTC backup; database and buffered transactions stored in non-volatile memory System and Network CPU Freescale i.MX6 1 GHz dual core Cortex-A9 System Memory 2 GB RAM SD Storage 16 GB SD card Network Port 10/100/1000 Mbps, full duplex, auto-negotiate Network Encryption AES 256-bit, with custom key management Indicators and Switches LEDs for power, LAN activity, serial port activity Memory Capacity Ten Clearances, Five Cards/Person, 40 Digit Card 500,000 cardholders Transaction Buffer Size 10,000 minimum, 500,000 maximum Dedicated Inputs Cabinet tamper, AC fail, low battery Inputs/Outputs Using IP-ACM Number of Readers Supported 2 Types of Readers Supported Wiegand, RS-485 (RM and OSDP Secure Channel), and Smart Protocol (TST-100 Touchscreen Terminal) Maximum Distance to Door RS-485: 1,219 m (4,000 ft);
Wiegand: 150 m (500 ft)Reader Power Available(dependent on power supply) 12V DC, 0.75A max per reader RM Bus Communications Two ports, RS-485 half duplex, two wire, plus optional two wires for device power Number of Supervised Inputs 4, configurable supervision per input Input Expansion Up to 16 additional inputs using I8 modules
on RM busNumber of Relay Outputs 2 Output Power Selection Individually configurable via jumper as power sourcing or dry contact relay Output Power (Wet) Up to 0.75 A per lock, selectable 12/24V Output Rating, Dry Contact 0 to 30V AC/DC, 3 A max Output Protection Individual resettable current switch, snubber, transzorb, reverse polarity protection Output Expansion Up to 16 additional relay outputs using
R8 modules on RM bus USTAR-LT08
ACCESS CONTROL PRODUCTS