USB6EP
ThingMagic USB Pro RFID Reader Writer
The ThingMagic USB Pro RFID Reader allows solutions developers to support applications that require desktop reading and writing of EPC Global Gen2 tags as well as other protocols such as ISO18000-6B, IPx and AEI ATA through additional license. Based on ThingMagic’s best-in-class M6e-Micro LTE UHF RFID module, the USBPro RFID Reader is controlled and powered by a host PC or laptop through a USB interface and supports autonomous operation.
The ThingMagic USB Pro RFID Reader is compatible with ThingMagic’s application development tools, including Universal Reader Assistant, permitting rapid creation of solutions to support a wide range of applications. The USB Pro RFID Reader is an ideal solution for tag commissioning, manufacturing WIP, document tracking, retail POS, and workflows for healthcare, events, and hospitality applications.
-
- Support for EPC global Gen 2 (ISO 18000-6C)
- Powered by USB connection to notebook or desktop PC
- ThingMagic reader assistant software and applications development tools
- Support for full 860 to 960 MHz UHF RFID carrier frequency range to accommodate worldwide regulations
- Wide power range from -5 to +30 dBm
- Tag read rate up to 50 tags/second
- Tag read distance up to 10 m (30 feet) with external antenna and up to 1.2 m (4 feet) distance, depending on tag sensitivity and orientation with internal antenna with max RF power
- Operating temperature range -40 to +60º C with appropriate duty cycle
- High impact plastic case
-
Tag Transponder Protocol RFID Protocol Support EPC Gen2V2 ISO18000-63 standard
ISO18000-6B, IPx, AEI ATA are available through additional licenseRF Interface Antenna Ports Internal antenna with an average gain of +1 dBi from 865-869MHz and 902-928MHz, External RF-SMA Antenna connector RF Power Output Separate read and write levels (into the antenna) are command-adjustable from -5 dBm to 30 dBm* (1W), +/-1.0dBm accuracy with +20dBm default Frequency From 865Mhz to 928Mhz Data Control/Interface Physical USB Micro-B connector with removable six (6) foot cable with dual USB-A type plug Signaling USB 2.0 I/O Two I/O command controlled LEDs and two I/O command queried switches Protocol Command-response protocol protected by length and 16-bit CRC Physical Dimensions 97mm L x 61mm W x 25mm H (3.8in L x 2.4in W x 1.0in H) Regulatory & Safety Regulatory FCC 47 CFR Ch. 1 Part 15, Industrie Canada RSS-21 0, ETSIEN 302 208 V1.41 Safety IEC 60950-1 (ed.2)
US-17650-ULPower DC Power Required DC Voltage: 4.5 to 5.5 VDC from USB cable
DC Power: 6.2 W max
Supplied interface cable terminates in two type-A plugs: one for power and signal, the second for additional power if neededIdle Power Consumption 0.35W max at idle (Power management modes can be used to reduce this as little as 0.1 W) Environment Operating Temp. -40C to +60C* Storage Temp. -40C to +85C Architecture User Memory 16kB Tag Buffer 200 tags Performance Tag Read Rate 50 tags/secods Tag Read Distance Up to 4 feet (1.2m) depending on tag sensitivity and orientation with internal antena - USB6EP